Publicité
Schéma de raccordement
Cd-328
2
BN
+(L+)
7
BU
-(M)
1
WH
ET
8
RD
Q
5
GY
CAN LOW in
6
PK
CAN HIGH in
4
YE
CAN HIGH out
Concept de commande
Mode et schéma de raccordement
1. Position background
2. Move at least one repeat
length using the light spot
Q Bank
Timer
SET
–
+
Press and hold SET button.
Hold down SET button.
Emitted light turns white.
KT8 CAN, Apprentissage statique
1. Position mark
2. Position background
Q Bank
Timer
Q Bank
SET
SET
–
+
–
+
Press and hold SET button > 1 s.
Press and hold SET button > 1 s.
Yellow LED flashes.
Yellow LED goes out.
Note
The bar display visualizes the detection reliability during teach-in. The more LEDs that illuminate, the better the teach-in:
1 LED illuminates = operation not reliable – contrast difference too low
≤ 4 LEDs illuminate = operation OK – sufficient contrast difference
> 4 LEDs illuminate = reliable operation – high contrast difference
Example
Dark switching
Internal signal
received
Switching
threshold
Internal signal
received
Output Q
Switching characteristics
Standard setting via control panel or CAN,
Device configuration only possible via CAN, cf. operating instructions.
2021-09-24 16:58:34 | Fiche technique
Sujet à modification sans préavis
Q Bank
Timer
Q Bank
SET
SET
–
+
–
Release SET button.
Timer
Light switching
Switching
threshold
Output Q
Timer
+
KT8W-N111C | KT8
DÉTECTEURS DE CONTRASTE
DÉTECTEURS DE REPÈRES | SICK
5
Publicité
