Royal Sovereign ARP-2208 Mode D'emploi page 7

UNPACKING
Accessories Included:
1. Exhaust hose
2. Hose connector
3. Window kit adapter
PLACEMENT
1. Place the unit on a firm, level surface in an area with at least 20" (50cm) of free space around it to
allow for proper air circulation. The electrical outlet used should be in accordance with the local
electric safety requirements.
2. Do not operate in close proximity to walls, curtains, or other objects that may block the units air inlet
and outlet.
3. Keep the air inlet and outlet free of obstacles.
Never install the unit where it could be subject to:
• Heat sources such as radiators, heat registers, stoves or other products that products that produce
heat.
• Direct sunlight
• Mechanical vibration or shock
• Excessive dust
• Lack of ventilation, such as next to a cabinet or bookcase
• Uneven surface
4. Remote control
5. Window Kit
Important:
To prevent damage after moving,
unpack the unit and let the unit
stand upright for a minimum of 2
hours. If the unit was accidentally
placed on its side, allow the unit
to set upright for at least 24 hours
before use.
-7
-
ARP-2208