Sedus se:do Mode D'emploi page 9

E Angle of the backrest
Adjusting the backrest dynamically:
®
Lean against the backrest
2.
Locking the backrest into position:
®
the desired angle
into position
Release the backrest lock when the chair is not in use
®
F Strength of the backrest pressure
Adjusting the backrest dynamically
®
1.
seat and backrest
until the desired position is achieved (greater backrest pressure) or upwards
(lesser backrest pressure)
G Depth of the seat (optional)
Press the finger plate and hold it fast
® 1.
position Release the finger plate, and the seat will engage
3.
H Seat angle (optional)
Stand up Swivel the lever backwards and lock into place (chair tilts 4°
® 1. 2.
forwards) or swivel downwards and lock into place (seat moves back into
its original position)
The backrest is free-floating
3.
1.
Press the lever down and release it to lock the backrest
2.
Crank the quick adjustment mechanism downwards
3.
Pull the lever upwards and release it
1.
Lean back until the backrest reaches
Exert only slight pressure on the
2.
Push the cushion to the desired
2.
3