Information For Users In The European Community; Guarantee; Declaration Of Conformity; Pag - SM 85 FLEXA Serie Manuel D'instructions Pour L'emploi

8. Information for users in the european community

Pursuant to European Directive 2002/96/EC on electrical waste (WEEE), users in the European community
are advised of the following.
• The symbol with the crossed-out dustbin on the appliance or its packaging indicates
that at the end of the product's life cycle, it must be collected separately from other
waste.
• Suitable separate collection of the equipment for subsequent recycling, treatment and
disposal contributes to preventing possible negative consequences for the environ-
ment and health, and favours the recycling of materials that the unit is made of.
• In accordance with European Directive 2002/96/EC, abusive disposal of the product by
the user will result in application of penalties as set forth by local law.

9. Guarantee

The guarantee becomes void if:
• The instructions in this manual are not complied with.
• The scheduled maintenance and repairs are carried out by unauthorized personnel.
• The machine is used for any other than its intended purposes.
• The original parts are replaced with parts from different manufacturers.
The guarantee does not cover damage caused by neglect, use and installation not in compliance with the re-
commendations of this manual, improper operation, abuse, lightning and atmospheric phenomena, overload,
excessive current, or insufficient or irregular power supply.

10. Declaration of conformity

The manufacturer:
La San Marco S.p.A.
34072 Gradisca d'Isonzo (GO) Italy – Via Padre e Figlio Venuti, 10
phone (+39) 0481 967111 – fax (+39) 0481 960166 – http://www.lasanmarco.com
declares under its own responsibility that the espresso coffee machine described in this manual and identified
by the data on the tag located on the machine, is compliant with directives 98/37/EC, 73/23/EC, 89/336/EEC,
89/109/EEC. For verification of compliance with said directives, the following harmonized standards have
been applied: EN 12100-1, EN 12100-2, EN 60335-1, EN 60335-2-75
Gradisca d'Isonzo, June 2007
Managing director
Mr Roberto Marri
23