Publicité
Les langues disponibles
Les langues disponibles
E
Identification
– 1, 1¼, 1½, 2 (DN/valve size)
– JRGURED Combi (name of fitting)
– JRG (manufacturer)
– Flow direction arrow
Note
Seals made of AFM 34 should never
be used with grease or oil.
(AFM = Asbestos Free Material).
Factory setting
The JRGURED Combi domestic water station
is factory set to a secondary pressure of 4 bar.
Installation requirements
During the installation of the JRGURED
Combi, domestic water stati on, rele-
vant regulations of the local water
supply utility must be observed.
Installation
The JRGURED Combi domestic
water station must be fitted only with
suitable tools.
Mounted position
The JRGURED Combi domestic
water station must be mounted
in a horizontal pipe, and easily
accessible.
A minimum space of 60 mm must be
allowed under the filter so that it can
be dismantled for maintenance. If a
hose is used for drainage, this dis-
tance must be increased accordingly.
JRGURED Combi domestic water
stations with a clear plastic filter
cup must not be exposed to conti-
nuous strong sunlight. If the filter
is instal led in an aggressive vicinity
or in rooms with uncontrollable
environ ment (solvents and/or clean-
ing agent vapors etc.) the transparent
filter cup must be protected accor -
dingly or replaced by a gunmetal filter
cup. We will be pleased to advise you
in cases of doubt.
17
I
Publicité
