Polaris 9350 Spot Manuel Du Propriétaire page 21

The Information LED
cleaner malfunctions.
LED Àashes once with one second
LED Àashes twice with one second
LED Àashes three times with one
Information about your cleaner's current status and any relevent error condition is available through a
troubleshooting status screen. To view this information:
1. Remove cleaner from the pool and turn power off.
2. Press
and
The following cleaner operation messages are displayed consecutively for three (3) seconds:
After cycling through each message, control unit returns to current day and time display.
on the control unit flashes in a specific sequence to indicate one of three possible
Unplug the Àoating cable from the control unit and reconnect.
Clean the ¿lter.
at the same time and hold for at least ¿ ve (5) seconds.