Polaris 9350 Spot Manuel Du Propriétaire page 15

You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1. Choose pool cleaning settings to program.
Choose
pool or bottom plus sides of pool.
• Choose
addition to bottom or bottom plus sides options.
• Choose
high intensity level cleaning.
• Choose
2. Press to view currrent programmed
cleaning cycles.
Cycle day and time is displayed for three
seconds.
3. When the cleaning cycle you want to change
is displayed, press and hold
seconds.
The days of the week Àash twice.
4. Press or
7 days of the week.
5. Press to select.
6. Press or
through 24 hours.
to select either bottom of
to select waterline only in
to select intensive or
to select pool shape.
for 3 to 5
buttons to cycle through
buttons to cycle
7. Press to select.
8. Press or
through four 15- minute increments (00, 15, 30,
or 45).
10. Press to select.
11. Press to program an additional cleaning
cycle for a different day
Press to exit the programming menu
Days of the week are lit indicating programs
stored in the control unit memory for that day.
1. Press and hold for 3 to 5 seconds.
The days of the week Àash twice.
2. Press or
through seven (7) days.
buttons to cycle
buttons to cycle