Polaris 9350 Spot Manuel Du Propriétaire page 16

3. Press and hold for 3 to 5 seconds to
delete programming for the selected day.
Press to exit.
1. Press to make sure you have exited
the Programming Menu.
2. Press and hold
programming in the control unit.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
to delete all
The ¿ lter canister should be cleaned at the end of each
cycle.
1. Make sure the control unit cable is disconnected
from the electrical outlet or the Àoating cable
has been disconnected from the control unit.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. To remove the ¿ lter canister assembly from the
cleaner, follow steps 5 through 8.
5. Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
(Figure 24).
1
2
6. Remove the ¿ lter canister assembly from the
body (3), as shown in Figure 25.