Conrad Electronic Raveland Power Package 2 Notice D'emploi page 31

• Connect the +12 V connection of the power terminal (14) directly to the positive terminal of the car battery.
• Connect the REM connection of the power terminal (14) to the remote control connection or the aerial control
output of the car radio.

The amplifier will be switched on via this input if a voltage of +12 V is supplied.
Nowadays, most car radios are provided with such a control output which only carries +12V if the radio
is switched on.
• Connect the GND connection of the power terminal (14) to the negative terminal (earth) of the battery or to the
car body.
Caution! As the electrical conductivity is limited due to the increased use of gluing technology
or coated metal parts, not every metal component is suited to function as an earthing point.

Distribute the power supply in a star-shaped way, i.e. the connections of the negative lines start from
one point for all components of the car hi-fi system. This way of distributing the power supply avoids
earth loops.
Connect the positive lines in the same way.
GND GND
POWER POWER
-
+12V +12V
REM REM FUSE FUSE
INPUT INPUT
+
SPEAKER FRONT SPEAKER FRONT
LEFT LEFT RIGHT RIGHT
BRIDGED BRIDGED
SPEAKER REAR SPEAKER REAR
LEFT LEFT RIGHT RIGHT
BRIDGED BRIDGED e24
020738
31