Intended Use; Explanation Of Symbols; Safety Instructions - Conrad Electronic Raveland Power Package 2 Notice D'emploi

2. Intended use

The Raveland Power Package 2 is intended to amplify and play low-level audio signals in motor vehicles.
It may only be connected to the 12V direct current on-board supply system with the negative terminal of the battery
connected to the car body. It may only be installed and used in cars with this on-board supply system.
The loudspeakers may only be connected to the loudspeaker outputs of audio devices.
Do not connect any of the devices to the 230 V mains supply.
When installing the components, the user has to ensure that they are protected against moisture and dampness.
Any use other than that described above can lead to damage to the components and also involves the risk of short-
circuits, fire, electric shock etc.
The components may not be modified or converted. Do not open the casing!
Please note all safety instructions and installation notes in this manual!

3. Explanation of symbols

The exclamation mark symbol indicates that the user must read and observe these operating
instructions before using the product.

The hand symbol indicates special tips and operating information.

4. Safety instructions

The guarantee/warranty will be void if damage is incurred resulting from non-compliance with
the operating instructions. We assume no liability for any consequential damage!
Nor do we assume liability for damage to property or personal injury caused by improper use
or failure to observe the safety instructions. In such cases the warranty is voided!
24