Subwoofer; Satellite Loudspeakers - Conrad Electronic Raveland Power Package 2 Notice D'emploi

• Mark the screw holes at the place of installation. You can use the device as a stencil.
• Drill the screw holes.
• Screw the amplifier tight using suitable screws.
b) Subwoofer
• Attach the subwoofer with straps or similar fasteners. The fasteners must be designed to bear the load of the
subwoofer in case of an emergency braking or an accident.
• The boot is a suitable place of installation.
c) Satellite loudspeakers
• Look for a suitable place of installation for the satellite loudspeakers.
• Make sure that the space behind the installation surface provides the required installation depth. If you install the
loudspeakers in the door, consider the space required by the windows when they are completely lowered.
• The installation surface must be sturdy enough to provide a safe installation. In some cases, it can be reinforced
with a wooden board or similar.
• After you have chosen the place of installation, cut out the installation openings for the loudspeakers.
Install the loudspeakers as illustrated below:
29