SNOWJOE SJ618E Manuel D'utilisation page 8

Fig. 10
3. Secure the lower crank rod in place with the cotter pin
(Figs. 11 – 12).
Fig. 11
Fig. 12
4. Slide the crank rod connector over the top of the lower
crank rod (Fig. 13).
Fig. 13
Crank rod
connector
Lower
crank rod
5. Align the hole on the bottom of the crank rod connector
with the hole in the lower crank rod, insert the first
thumbscrew and turn clockwise to secure it (Fig. 14).
Fig. 14
6. Slide the upper crank rod through the rubber ring located
on the middle frame (Fig. 15).
Fig. 15
8