Discharge Chute Assembly - SNOWJOE SJ618E Manuel D'utilisation

7. Slide the upper crank rod into the top of the crank rod
connector (Fig. 16).
Fig. 16
Crank rod
connector
Lower crank
rod
8. Align the holes on the connector with the holes in the
upper crank rod, insert the second thumbscrew and turn
clockwise to secure it (Fig. 17).
Fig. 17

Discharge Chute Assembly

1. Align the lower chute to the slot in the collar, and rotate
clockwise to the locked position (Figs 18 – 19).
Fig. 18
Lower chute
Upper crank rod
Fig. 19
2. Secure in place with the provided screw (Fig. 20).
Fig. 20
Screw
3. Position the chute deflector over the discharge chute and
align the holes (Fig. 21).
Fig. 21
Carriage bolt
9
Locking arrow
Square hole
of the chute
Deflector knob