Emerson RAH ECO CF915TM60BS00 Mode D'emploi page 12

5. How to Wire Your Ceiling Fan
5.2
Securely connect the Fan Motor White Wire to the Supply
White (neutral) Wire using a Wire Connector (supplied)
(Figure 17).
5.3
Securely connect the Fan Motor Black Wire to the Supply
Black (hot) Wire using a Wire Connector (supplied)
(Figure 18).
5.4
After connections have been made, turn Leads upward
and carefully push Leads into the Outlet Box, with the
White and Green Leads on one side of the Outlet Box and
position the Black Leads on the other side of the Outlet
Box (Figure 19).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
Figure 17
Figure 18
GREEN
WIRES
WHITE WIRES
Figure 19
12
(Continued)
SUPPLY WHITE
(NEUTRAL)
LISTED WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
FAN MOTOR
BLACK WIRE
SUPPLY
BLACK
(HOT)
LISTED WIRE
CONNECTOR
BLACK WIRES
U.L. Model No.: CF915