LawnMaster VBRM16 Manuel D'instructions page 34

TROUBLESHOOTING
No charging
procedure possible.
The charge control
LEDs do not light up
after inserting the
mains plug into the
socket.
The battery contacts are
contaminated.
Socket outlet, fuse, mains cable
or battery charger are defective.
The battery has a fault.
Mains plug of the battery charger
is not plugged in properly.
Socket outlet, mains cable or
battery charger are defective.
Plug Fuse Blown.
Clean the battery contacts (e.g. by
inserting and removing the battery
several times) or replace the battery.
Check the mains voltage and fuse.
If necessary, contact the After Sales
Helpline.
Replace the battery.
Insert mains plug fully into the socket
outlet.
Check the mains voltage and if
necessary, contact the After Sales
Helpline.
Check and replace fuse in the plug.
34