Thermador DWHD64CP Guide D'entretien Et D'utilisation page 10

Preparing and Loading the Dishware
Rack Attachment Use
To use the rack attachment, fold down the cup
shelves and place items to be washed, see
Figure 13.
Figure 13
Loading Extra Tall Items
If an item is too tall to be placed into the bottom
rack even with the top rack in the raised position,
Remove the empty top rack by pulling it out of the
dishwasher until it stops rolling.
Pull the front of the rack upward and outward until
the rollers are completely free of the roller guides.
Set the top rack aside.
Push the
roller guides
back into the
dishwasher.
Insert the
Extra Tall
Item
Sprinkler
into the top
rack spray
outlet and
turn the
sprinkler
clockwise
to lock it
into
position as
shown in
Figure 14.
NOTE : Keep the vent on the tub's right side clear
by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom
rack's left side, center, or back.
8
Figure 14
(continued)
Place your extra tall item(s) in the bottom rack as
shown in Figure 15.
Do not block vent.
Figure 15
To avoid dishwasher damage, do not
reinstall the top rack without removing the
extra tall item sprinkler. Do not reinstall the
top rack with the sprinkler installed.
To remove the sprinkler and return the
dishwasher to its normal condition:
1. Turn the sprinkler counterclockwise and
remove it.
2. Retrieve the top rack.
3. Tilt the top rack upwards and position the top
rack rollers onto the roller guides.
4. Continue pushing the top rack until the
rollers are on the guide.
5. Push the top rack into the dishwasher.