F-1 Prepare to Install Rear-Facing
2.3-18 kg (5-40 lbs.), 48-91 cm (19-36 in.)
Rear-Facing using 5-point harness
UAS Belt
Never install a rear-facing child
restraint in the front seat of a vehicle
equipped with an active passenger side
frontal airbag.
This child restraint must always face the rear of
the vehicle and be in the fully reclined position
until the child is at least 1 year old, weighs 10
kg (22 lbs) AND is able to walk unassisted.
36
Lap/Shoulder Belt
Lap Belt
F-2 Prepare UAS for Rear-Facing Use
1.
Pull Pad Off Corners of
Child Restraint
Pull the seat pad off the
front corners of shell.
2.
Unhook UAS from UAS
Attachment
Press down firmly on child
restraint and press the red
release button on each
connector and pull the
connector from the UAS
attachment. Remove the
UAS from the forward-facing
belt path.
3.
Routing UAS
Insert the UAS connector
with adjuster through the
rear-facing belt path.
Adjuster
37
continued on next page.