Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
c.
Choose one of the three buckle
slots that is closest to child.
From the front of child restraint,
push the metal retainer through
pad and shell. Make sure that
the buckle is facing out.
d.
Reach under seat between base
and shell. Pull metal retainer
completely through pad and
shell.
e.
Pull up on buckle strap to make
sure it is secured.
The buckle must not pull out.
Failure to place buckle strap's metal retainer
completely through pad and shell can result
in serious injury or death.
7.
Check Harness/Headrest
Height
With child in the child restraint,
check the location of the upper
harness guides.
Follow the guidelines on next
page to determine the correct
harness/headrest height.
16
Rear-Facing Position
Upper harness guides must
be even with or just below
the shoulders.
If the upper harness guides
are above the child's
shoulders with the headrest
in the lowest position, do
not use this child restraint. Children have a tendency to
want to slouch. Make sure the child's bottom and back
are flat against the child restraint. If harness height is still
incorrect, call Consumer Relations for more detailed help.
Forward-Facing Position
Upper harness guides must
be even with or just above
the shoulders.
If the upper harness guides
are below the child's shoulders
with the headrest in the
highest position, do not use
this child restraint.
8.
To Adjust Headrest/Harness
Height
Make sure harness straps
are loose. While rotating
the headrest/harness height
adjustment levers inward,
move headrest up or down to
the proper height and lock into
place.
17
continued on next page.
Publicité
Table des Matières
