1. Manuels
  2. Marques
  3. Allmatic Manuels
  4. Récepteurs
  5. B.RO X40 Display
  6. Mode d'emploi

Allmatic B.RO X40 DISPLAY Mode D'emploi page 38

Masquer les pouces Voir aussi pour B.RO X40 DISPLAY:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9.3.1 - ENTER SETTING STEP BY STEP
•
Wired input 1:
1.
Press and hold MENU button for at least 1 second.
2.
Select the item of the menu param and confirm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confirm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I01 and confirm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funt parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funt parameter to F03 and confirm by pressing the MENU button for at least 1 second.
7.
Press briefly the MENU button for 2 times to quit the Input menu.
8.
Select the item of the menu rtime and confirm the selection by pressing the MENU button for at least 1 second.
9.
Select the item of the menu r01 and confirm the selection by pressing the MENU button for at least 1 second.
10. Select the item of the menu LIfe and confirm the selection by pressing the MENU button for at least 1 second.
11. Set the parameter to 1 (1 second) and confirm by pressing the MENU button for at least 1 second.
12. Select the item of the menu dLy and confirm the selection by pressing the MENU button for at least 1 second.
13. Set the parameter to 30 (30 seconds) and confirm by pressing the MENU button for at least 1 second.
14. Press briefly the MENU button for 4 times to quit the menu.
•
Wired input 2:
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu param and confirm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confirm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I02 and confirm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funt parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funt parameter to F00 and confirm by pressing the MENU button for at least 1 second.
7.
Press briefly the MENU button for 4 times to quit the menu.
•
Wired input 3:
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu param and confirm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confirm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I03 and confirm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funt parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funt parameter to F02 and confirm by pressing the MENU button for at least 1 second.
7.
Press briefly the MENU button for 2 times to quit the Input menu.
8.
Select the item of the menu rtime and confirm the selection by pressing the MENU button for at least 1 second.
9.
Select the item of the menu r03 and confirm the selection by pressing the MENU button for at least 1 second.
10. Select the item of the menu LIfe and confirm the selection by pressing the MENU button for at least 1 second.
11. Set the parameter to 1800 (30 minutes) and confirm by pressing the MENU button for at least 1 second.
12. Press briefly the MENU button for 4 times to quit the menu.
•
Wired input 4:
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu param and confirm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confirm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I04 and confirm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funt parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funt parameter to F02 and confirm by pressing the MENU button for at least 1 second.
7.
Press briefly the MENU button for 2 times to quit the Input menu.
8.
Select the item of the menu rtime and confirm the selection by pressing the MENU button for at least 1 second.
9.
Select the item of the menu r04 and confirm the selection by pressing the MENU button for at least 1 second.
10. Select the item of the menu LIfe and confirm the selection by pressing the MENU button for at least 1 second.
11. Set the parameter to 43200 (12 hours) and confirm by pressing the MENU button for at least 1 second.
12. Press briefly the MENU button for 4 times to quit the menu.
•
Learning and setting of the default transmitter with 4 channels:
NOTE: the setting of the default transmitter is necessary only for the first remote control.
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu Modif and confirm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Pdef and confirm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu btn and confirm the selection by pressing the MENU button for at least 1 second.
5.
Select the item of the menu b01 and confirm the selection by pressing the MENU button for at least 1 second.
6.
Select the item of the menu f00 and confirm the selection by pressing the MENU button for at least 1 second.
7.
Enable the key in the CH:01 output and confirm the selection by pressing the MENU button for at least 1 second.
8.
Disable the key in the CH02 output and confirm the selection by pressing the MENU button for at least 1 second.
9.
Disable the key in the CH03 output and confirm the selection by pressing the MENU button for at least 1 second.
10. Disable the key in the CH04 output and confirm the selection by pressing the MENU button for at least 1 second.
11. Select the item of the menu Pdef and confirm the selection by pressing the MENU button for at least 1 second.
12. Select the item of the menu btn and confirm the selection by pressing the MENU button for at least 1 second.
13. Select the item of the menu b02 and confirm the selection by pressing the MENU button for at least 1 second.
14. Select the item of the menu f00 and confirm the selection by pressing the MENU button for at least 1 second.
18/20
ITA
ENG
FRA
ESP
6-1620020
rev.3
05/12/2022

Publicité

Table des Matières
loading

Manuels Connexes pour Allmatic B.RO X40 DISPLAY

Produits Connexes pour Allmatic B.RO X40 DISPLAY

Table des Matières