Allmatic B.RO X40 DISPLAY Mode D'emploi page 31

Enable/disable the transmitter key in the output channel 1 with the UP (+) or
Enable/disable the transmitter key in the output channel 2 with the UP (+) or
Enable/disable the transmitter key in the output channel 3 with the UP (+) or
Enable/disable the transmitter key in the output channel 4 with the UP (+) or
The receiver returns to the selection screen of the position of the transmitter,
6-1620020 rev.3
Press and hold the MENU button until the display shows:
DOWN (-) buttons of the receiver.
If the button is enabled, the display shows:
Press and hold the MENU button until the display shows:
DOWN (-) buttons of the receiver.
If the button is enabled, the display shows:
Press and hold the MENU button until the display shows:
DOWN (-) buttons of the receiver.
If the button is enabled, the display shows:
Press and hold the MENU button until the display shows:
DOWN (-) buttons of the receiver.
If the button is enabled, the display shows:
Press and hold the MENU button until the display shows:
in the position just used. For example:
To quit, press the MENU button or wait one minute of inactivity.
ITA
05/12/2022










ENG FRA ESP
11/20