Mounting The Rangehood - Jenn-Air JXT9030CDP Guide D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5
INSTALLATION

MOUNTING THE RANGEHOOD

ELECTRICAL
WARNING
All Electrical work must by performed by qualified electrician or person with similar technical
know how and background.
For personal safety, remove house fuse or open circuit breaker before beginning installation.
Do not use extension cord or adapter plug with this appliance.
Follow National electrical codes or prevailing local codes and ordinances.
Electrical Supply:
This appliance requires a 120V 60Hz electrical supply, connected to an individual, properly grounded
branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2
wire w/ ground. Please also refer Electrical Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also required by local codes. Check with local
requirements and codes, purchase and install appropriate connector if necessary.
Cable Lock

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jxt9036cdpJxt9048cdpMk7030Mk7036Mk7048

Table des Matières