Environmental Protection; Safety Instructions - Triton TTS 1400 Instructions D'utilisation Et Consignes De Sécurité

Triton ref
TTSTP
TTST1500
TTSWC
TTSAG
TTSTS
TTSPG
TTSDES
TTSTC
TTSSB
TTSCB1500
TTSCB700
SYMBOLS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Always wear ear, eye and respiratory
protection.
Conforms to relevant legislation
and safety standards.

SAFETY INSTRUCTIONS

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
Know Your Product / Symbols / Safety Instructions
4 4
Accessories (available separately)
Track Pack Includes:
2 x 700mm / 27- ⁄ " of Track,
9
16
2 x Track connectors
1500mm / 59" Track
Work Clamps
Angle Guide
T-Square
Parallel Guide
Dust Bag
Track Connectors
Track Saw Bag
Track Bag 1500mm / 59"
Track Bag 700mm / 27 ⁄
9
16
WARNING. To reduce the
risk of injury, user must read instruction
manual
Instruction warning.
Double insulated for additional
protection
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
"