Lincar Olga 502 Instructions D'usage Et Entretien page 39

Inclination Roof C (°)
Re-flux area
Chimney
Pot Wind
Damping
DIMENSIONS FOR EXAUST TUBE CONNECTION AND AIR SUCTION
Attention to stove model.
•
In case that it's necessary to make hole in wall for exhaust fume, proceed as follows :
•
Measure and draw with real dimension on the wall the points for stove connection;
−
Realize the hole on the wall.
−
Connect the stove to the flue with the tube for exhaust fume.
−
In case that the exhaust tube has a connection position not horizontal (f.e.up
−
connection ) it's necessary to maintain a security distance of exhaust tube from wall
of 100 mm.
A
15 1,85
30 1,50
45 1,30
60 1,20
Chimney pot
wind damping
Revolving
chimney pot
for strong
horizontal
wind
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 502-502X-502L-502LX
GB GB FR FR ES ES
Re Flux Area Highness Z (m)
H
1,00
1,30
2,00
2,50
39/128
0,50
0,80
1,50
2,10