Fluke COMARK BT42 Mode D'emploi page 9

On Alarm the speaker will bleep, press
any key to stop.
Bluetooth MAC Address
The Bluetooth MAC address will be
indicated next, in blocks of 4 numbers
on alternate seconds. Simply press the
Bluetooth button to exit setup and return
to normal operation.
Bluetooth Operation
To switch on the Bluetooth, press the
Bluetooth button. Bluetooth radio will
advertise for 60 seconds (Bluetooth
Symbol will flash during this time). If
after this time a successful connection is
not made, the Bluetooth radio will shut
down, leaving only the thermometer
active. To re-attempt making a Bluetooth
connection, simply press the Bluetooth
button again.
Note: The advertising text for searching is
BTXX 12345678, where XX is the model
number, e.g. 42 or 48 and 12345678 is
the serial number.
Taking Measurements
Having successfully connected the
Bluetooth Thermometer to Comark
Kitchen Checks app, check that the
Bluetooth symbol in the LCD is solid.
To record the displayed reading press
the Bluetooth button on the keypad.
The temperature display will flash. The
app will guide you through storing the
temperature record.
Note: The app will display the reading as
indicated on the LCD, e.g. including MAX/
MIN or Data Hold values.