Locate The Com Port Of The Usb Service Interface - SMA USB-SERVICE-INTERFACE Instructions D'installation

SMA Solar Technology AG
5.4 Locate the COM port of the USB Service Interface
You will need the USB Service Interface COM port to configure Sunny Data Control.
Find COM port under Windows XP/Windows 2000.
1. Select Start > Settings > Control Panel > System > Hardware > Device Manager.
2. Under "Ports (COM & LPT)", select USBPB Serial
Port (COMx).
3. Make note of the COM port: ______________ .
Find COM port under Windows Vista/Windows 7.
1. Select Start.
2. Right-click on Computer and select Properties.
3. Select Device Manager.
4. Under "Ports (COM & LPT)", select USBPB Serial
Port (COMx).
5. Make note of the COM port: ______________ .
Installation Guide
5 Initial Start-up
USBPBS-IXX103813 51