Installing Drivers In Windows Vista - SMA USB-SERVICE-INTERFACE Instructions D'installation

5 Initial Start-up
5.3.2 Installing Drivers in Windows Vista
You will need to install drivers for 2 hardware components.
Procedure:
• Install driver for the USBPB
• Install driver for USB serial port
Windows Security
During the installation of a Window driver from SMA, you will receive a warning notice under
Windows stating that the manufacturer of the driver software could not be tested.
This warning notice appears when other providers' drivers are installed. It indicates that the
manufacturer's driver was not tested in the Microsoft "Windows Hardware Quality Labs
(WHQL)" laboratory.
SMA Solar Technology AG has checked the driver's function and approved the driver. You can
ignore Microsoft's recommendation that you stop installation and continue with the installation.
Install Driver for the USBPB
1. Insert the USB plug of the USB service interface in the laptop's USB connectors.
☑ The "Found New Hardware" wizard will open.
✖ If the "Found New Hardware" wizard does not
open...
• See Section 8 "Troubleshooting", page 58
2. Select Locate and install driver software
(recommended).
3. Select I don't have the disc. Select Show me
other options.
44 USBPBS-IXX103813
SMA Solar Technology AG
Installation Guide