SMA USB-SERVICE-INTERFACE Instructions D'installation page 42

5 Initial Start-up
3. When the window asks "What do you want the
wizard to do?", select Install from a list or
specific location (Advanced), and click [Next>].
4. Select [Browse] and select the folder in which the
unzipped driver file is located.
5. Select [Next].
6. Select [Continue Anyway].
☑ The installation will start.
☑ The "Completing the Found New Hardware"
wizard window will open.
7. Select [Finish].
☑ The "Found New Hardware" wizard will open.
✖ If the "Found New Hardware" wizard does not
open...
• See Section 8 "Troubleshooting", page 58
42 USBPBS-IXX103813
SMA Solar Technology AG
Installation Guide