geo-FENNEL Selection PRO Série Mode D'emploi page 30

EN
Press button 1 long to switch on or off the signal tone.
Press 1 x long for sound ON
Confirmation: one beep)
Press 2 x long for sound OFF
(Confirmation: two beeps)
Press button 1 short to select SHORT distance or LONG distance receiving mode
Press 1 x short for LONG
(Confirmation: green LED indication)
Press 2 x short for SHORT
(Confirmation: LED off)
DISTANCE SHORT/LONG
With the function DISTANCE SHORT/LONG the radius of the tracking function
will be determined;
i. e. by selecting the tracking radius of the instrument interactions of several
instruments on the same contruction sites will be avoided.
Tracking distance SHORT = 8 - 10 m
Tracking distance LONG = 30 m
In case the tracking distance LONG was selected the tracking procedure will run
in a fine mode; in case of selecting tracking distance SHORT the tracking mode
will be coarse.
30