Pleasant Hearth OFG828T Mode D'emploi page 16

ASSEMBLY INSTRUCTIONS
13. Before connection, be sure that there is no debris
caught in the outlet of the gas cylinder, inlet of the
regulator valve or in the outlet of the burner and
burner ports. Ensure the propane cylinder valve is
turned off.
Fasten the propane cylinder with the propane tank
strap (J). Then connect the regulator (Q) to the
cylinder as shown in figure 13.
WARNING: Do not allow to tip or fall over, as fire,
damage to property, or serious injury could occur. The
fire pit must remain upright, as illustrated, at all times.
13
Q
16
K J