Pleasant Hearth OFG828T Mode D'emploi page 12

ASSEMBLY INSTRUCTIONS
8. Pour one package of glass rocks (N) over the burner.
Do not cover ignition screen (O) with glass rocks (N).
Use a glove when handling glass rocks.
WARNING
DO NOT COVER THE IGNITION SCREEN when placing the glass rocks
into the fire bowl. Always keep Ignition Screen visible. This screen must
be clear and free of obstructions at all times to insure proper operation.
Screen
Do not place
glass rock on screen.
Keep screen clear.
The burner of the firebowl must be covered by glass rocks
completely. Otherwise the flame may be extinguished occasionally.
See the Figure CORRECT and INCORRECT for reference.
GLASS ROCKS - Use a glove when handling glass rocks.
1. Do not light or use gas unit if glass rocks are wet. Make sure glass rocks are completely dry
before lighting as intense heat could cause the rock to crack.
2. Glass rocks could hit a person's face or eyes during the initial startup of this unit. Keep away from
the appliance for the first 20 minutes after lighting.
3. Use only Pleasant Hearth / GHP Group, Inc. factory-authorized glass rocks. The use of any glass
rock that is not factory-authorized can be dangerous and will void your warranty.
4. Do not add additional rocks to the fire bowl. Only 14.33 lbs / 6.5 kgs are approved for safe use
with this fire pit.
5. Do not use two different sizes of glass rocks at the same time.
6. Do not mix glass rocks with lava rocks.
8
CORRECT
CAUTION
12
O
N
INCORRECT