Maintenance; Adjust The Chain Tension; Sharpen The Cutters - GreenWorks CSA801 Manuel De L'utilisateur

EN
39
38
When the log is on a slope:
1. Stand on the uphill side.
2. Control the chainsaw completely.
3. Hold the chainsaw handles tightly.
4. Release the cutting pressure near the end of the cut.
When bucking is complete (38):
1. Wait for the chain to stop (39).
2. Ensure the chainsaw is turned off.
3. Check for hazards before you move to another tree.
11

MAINTENANCE

Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Pull the mains plug out of the socket before maintenance.
11.1

ADJUST THE CHAIN TENSION

The more you use a chain the longer it becomes. It is
therefore important to adjust the chain regularly to take up the
slack.
Tension the chain so that it can only just be pulled away from
the bar at its centre point.
A slack chain may jump off and cause serious or even fatal
injury.
CAUTION
CAUTION
WARNING
WARNING
English
Wear protective gloves if you touch the chain, bar or areas
around the chain.
1. Stop the machine.
2. Loosen the chain cover by turning the chain cover knob
(11) counterclockwise.
It is not necessary to remove the chain cover to adjust the
chain tension.
13
3. Turn the chain tension knob (13) clockwise to increase
the chain tension.
4. Turn the chain tension knob counterclockwise to decrease
the chain tension.
13
5. When the chain is at the wanted tension, tighten the chain
cover.
11.2

SHARPEN THE CUTTERS

Sharpen the cutters if chain does not go into wood easily.
We recommend that a service center, which has an electric
sharpener, perform important sharpening work.
1. Tensioning chain.
12
CAUTION
NOTE
11
11
NOTE