Signature Kitchen Suite SKSFD4826P Manuel D'installation page 35

en-us_main.book.book Page 35 Monday, January 30, 2023 4:04 PM
(Optional) After adjusting the door spring, attach the gray plastic sheets to hide the adjusting screws
and the hinge holes .
b
Adjusting the Door Stop
The default door stop position is 115°. Follow these instructions to change the door stop position to 90°.
1
Open the door to 90°.
2
Insert the door stop pin in the holes which are now aligned at the back of the hinge. Use a rubber
mallet to fully insert the pin.
SPECIAL INSTALLATIONS 35
a