Publicité
Step 4
Attach 3041L204 Center Link Bar (item 1) and 3041M201
Drawbar Tab Bushing (item 6) to the tractor top link mount using
the tractor's hitch pin.
Step 5
Assemble the two 3041L205 Outer Link Bars (two of item 2)
to backhoe top link mount (see arrow). Remove the toplink
turnbuckle and bolt from the backhoe. Use that bolt to secure
the Outer Link Bars.
(The toplink supplied with the backhoe is not required with the
Three-point Hitch Kit.)
2
6
1
PT302
Step 6
Risk of crushing hazard. The operator must be
safely positioned in the seat before operating the
backhoe. Clear the area of bystanders.
Start the tractor and raise the lower link arms so the bottom of
the backhoe is approximately 13" (330 mm) off the ground.
Use the backhoe boom and stabilizers to align the Center Link
(item 1) and Outer Link Bars (item 2) for Step 7.
1
2
IMPORTANT! Make sure the backhoe is straight (aligned
with the tractor) and level.
Do not risk machine moving unexpectedly.
Apply parking brake and turn engine off before
proceeding.
5
WARNING!
WARNING!
W057
Publicité
