Beko VRT 95929 VI Mode D'emploi page 24

5 Cleaning and maintenance
5.3 Cleaning of the EPA E12 Filter and outlet foam
C
Clean the EPA E12filter and outlet foam regularly.
A
CAUTION:
Remove the lid simultaneously
while pressing the EPA E12 filter
release button.
1
Inspect the outlet foam regularly.
Clean it by washing under running
cold water after removing the dust
on them in case of excessive dust .
Reinstall it once it is dried.
A
CAUTION:
24 / EN
Do not wash the EPA E12 filter.
1
Remove the EPA E12 filter and the
outlet foam inside it.
2
24h
Install the EPA E12 filter and outlet
foam to the lid.
Wash with cold water. Warm water deteriorates the structure of the filter.
2
Remove the dust on the EPA E12
filter and outlet foam by tapping
them to a hard surface such as a
waste bin or by using a brush.
Place the lid back.
Cordless Stick Vacuum Cleaner / User Manual