Beko VRT 95929 VI Mode D'emploi page 11

3 Installation
3.1 Intended use
This appliance is intended for household use and it is not suitable for industrial use.
3.2 Installation of the mobile charging dock
Install charging dock tube (16) to
the charging dock support (17),
then install the charging dock (15)
to the charging dock tube (16).
1
2
If you want to install the charging
dock (15) to the wall, detach
the charging unit from the tube
(16) and support (17) using two
separate buttons.
Cordless Stick Vacuum Cleaner / User Manual
1
2
Install the thin end of the charger to
the seat on the charging dock (15).
Plug the charging adaptor (19) to
the outlet.
102-104 cm
Position the charging dock (15) at
a height of 102-104 cm from the
ground.
1
2
Install the end of the charging
adaptor (19) to the seat on the back
of the charging dock (15).
Put the cord of the charging
adaptor through the power cord
securing ring behind the charging
dock tube and secure the cord.
Install the charging dock (15) to the
wall using two screws (24) and two
dowels (25).
11 / EN