Beko VRT 95929 VI Mode D'emploi page 23

5 Cleaning and maintenance
C
Clean the metal filter and inlet foam by washing under running cold water once a month after removing
the dust on them.
Remove the metal filter and inlet
foam inside the dust reservoir (11)
by rotating the metal filter counter-
clockwise.
A
CAUTION:
1
2
Wash the inlet foam under running
cold water and let it dry.
C
It may 24 to 48 hours to dry the washed inlet foam. Reinstall it once you are sure that it is dried.
Cordless Stick Vacuum Cleaner / User Manual
Remove the inlet foam inside the
metal filter.
Wash with cold water. Warm water deteriorates the structure of the filter.
24h
Install the dried inlet foam to the
metal filter.
Remove the dust on the metal filter
and inlet foam by tapping them to a
hard surface such as a waste bin or
by using a brush.
1
Install the metal filter and inlet foam
inside the dust reservoir (11) by ro-
tating the metal filter clockwise.
23 / EN
2