Filters; General Information - Blueair Blue PURE 121 Guide D'utilisation

FILTERS

Filters

General information:

The unit is delivered with two fabric pre-filters and either a Particle
filter or Particle + Carbon filter. These filters remove the following
pollutants:
Particle filters remove:
PM2.5* Dust
Mold Dust mites
Particle + Carbon filters remove all the above pollutants, plus:
VOC Smoke
*Particle matter smaller than 2.5 microns
IMPORTANT
!
Use only genuine Blueair filters to ensure proper function of your
unit and to qualify for full warranty coverage.
12
Pollen Pet dander
Bacteria
Chemicals Cooking odors
Button control functions
1 2
Change filter Change filter
indicator When the indicator
When the indicator light turns red (after
turns yellow (after 5 1 extra month of
months of operation), operation), you
it's time to order a should change the
new filter. main filter.
You can change the filter before the indicator light turns red, i.e. when
it first turns yellow. In this case, just reset the unit after changing the
filter and use for another 6 months. (see "Change the main filter")
FILTERS
3
Reset the filter alert
Press the button for
three seconds to
reset the filter alert.
13