Setup; Getting Started; On/Off And Operating Speeds - Blueair Blue PURE 121 Guide D'utilisation

SET UP

Getting started

If the optional pre-filter is used refer to steps 1 to 5. Otherwise refer to
steps 5 and 6.
1 2
Gently press the Remove the top
buttons on both portion
sides of the unit of the unit.
simultaneously.
4 5
Next, reposition the Plug in the unit.
top of the unit onto
the bottom and make
sure it clicks into
place.
10
3
Then attach the fabric
pre-filter. To ensure
a smooth fit, pull it
carefully over the
metal frame.
6
Press the button to turn
the unit on. The unit
automatically sets itself
to the recommended
energy-efficient
operating speed.
When the indicator light
glows white your unit is
working properly.
On/off and speed control
1 2
On/Low Medium
Press once to turn Press twice to set to
the unit on and set it medium speed.
to the recommended
energy-efficient
speed.
Moreover, the unit has an Autostart feature.
4
This means that the unit will automatically
restart at the set speed if a power failure
occurs, the unit is unplugged or a power
switch timer is used.
Off
Press a fourth time to
turn the unit off.

ON/OFF AND OPERATING SPEEDS

3
High
Press three times to
set to high speed.
11