FILTERS
Vacuum or wash the pre-filter
Occasionally vacuum the exterior of the fabric pre-filter to remove dust.
Before removing the fabric pre-filter, turn off and unplug the unit.
1
2
Gently pull and
Wash the pre-
detach the
filter on a gentle,
pre-filter from
low temperature
the lower half
cycle in the
of the unit.
washing
machine.
5
6
Re-fit the fabric
Replace the
pre-filter over
top of the unit,
the bottom part
pressing firmly
of the unit.
until you hear a
click.
14
3
4
Before re-
Lift off the top
placing the
of the unit.
fabric pre-filter,
gently press the
release buttons
on both sides of
the unit until you
hear a click.
Plug in the unit.
7
8
To restart the unit press the
button for three seconds, and
then release it.
Change the main filter
When the indicator light turns red, it's time to change the main filter.
Before changing the main filter, turn off and unplug the unit.
2
1
Gently press the
Lift off the top of the
release buttons on
unit.
both sides of the unit
until you hear a click.
Plug in the unit.
4
5
6
Firmly press the top
of the unit down onto
the new main filter
To restart the unit
until you hear a click.
press the button for
three seconds, and
then release it.
FILTERS
3
Remove the old main
filter from the unit.
Unfold the new main
filter and insert into
the unit.
This lets the unit
know that you have
changed the main
filter. The indicator
light flashes 3 times
and then changes
from red to white.
15