Product Features; Technical Data - Bosch GCM 8 SDE Professional Notice Originale

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Slide device
(2) Chip ejector
(3) Transport handle
(4) Depth stop adjusting screw
(5) Laser protection cap
(6) Guide roller
(7) Lock-off function for on/off switch
(8) On/off switch
(9) Handle
(10) Protective guard
(11) Retracting blade guard
(12) Saw blade
(13) Saw table extension
(14) Fence
(15) Adjustable fence
(16) Saw table
(17) Clamping lever of the saw table extension
(18) Scale for mitre angles
(19) Insert plate
(20) Locking clamp
(21) Locking knob for all mitre angles
(22) Mitre pre-setting lever
(23) Tilt protector
(24) Angle indicator for mitre angles
(25) Detents for standard mitre angles
(26) Mounting holes
(27) Recessed handles
(28) Screw clamp
(29) Standard bevel angle stops 45°, 22.5° and 33.9°
(30) Scale for bevel angles
(31) Angle indicator for right-hand bevel angle range
(32) Depth stop

Technical data

Sliding mitre saw
Article number
Rated power input
No-load speed
Starting current limitation
Laser type
Laser class
Divergence of laser line
Bosch Power Tools
(33) Locking screw for slide device
(34) Hex key (5 mm)
(35) Holes for screw clamp
(36) Length stop
(37) Transport safety lock
(38) Speed regulator
(39) Laser warning label
(40) On/off switch for laser (cutting line indication)
(41) Clamping lever for all bevel angles
(42) Angle indicator for left-hand bevel angle range
(43) Chip deflector
(44) Stop for standard 0° bevel angle
(45) Spindle lock
(46) Hex socket screw for mounting the saw blade
(47) Clamping flange
(48) Laser beam outlet aperture
(49) Inner clamping flange
(50) SDS bolt
(51) Locking screw for the adjustable fence
(52) Threaded rod
(53) Screws for insert plate
(54) Locking screw for length stop
(55) Clamping screw for length stop
(56) Set screw for laser positioning (parallelism)
(57) Screw for bevel angle indicator
(58) Stop screw for 0° bevel angle
(59) Stop screw for left-hand bevel angle range
(60) Stop screw for right-hand bevel angle range
(61) Set screws for mitre angle scale
(62) Screw for mitre angle indicator
(63) Hook-and-loop strap
(64) Laser lens cover
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GCM 8 SDE
3 601 M19 2..
W
rpm 3500−5300
nm
mW
mrad (full angle)
English | 29
A)
A)
A)
GCM 8 SDE
3 601 M19 2B.
1600
3500−5300
●
650
< 0.39 < 0.39
1M
1.0
1 609 92A 5U6 | (14.10.2020)
1400
●
650
1M
1.0