Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9036120
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4.
Support the workpiece or clamp it to a stable platform. Holding the
workpiece by hand or against your body may lead to personal injury.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Check to ensure that all applicable bolts and nuts are firmly tightened.
4.
Place the metal bender on a solid, level surface capable of supporting
the weight of the metal bender and workpiece.
a.
Use bolts to secure the metal bender when installing on
a workbench.
4.
Only use accessories rated to handle the forces exerted by this tool
during operation. Other accessories may break and forcefully launch
debris into the work area.
5.
Sharp edges or burrs may develop during the bending process. Wear
heavy gloves to protect the hands.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
4
48 in. Bench-Top Metal-Bending Brake
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
