Signature SHD60FLIGNE/3 Manuel D'utilisation page 29

8. Slide the upper part of the chimney inside the part lower part, then pull
the upper part up to the height desired.
Attach 2 x Security Screws (4mm x 30mm) to the back of the 6mm thick
case. diameter.
9. Mount the chimney on the hood then fix them together with 2 screws.
10. Installing the charcoal filter .
First, remove the grease filter by pulling it down after having unblocked.
Mount the charcoal filter on the hood by turning it clockwise.
Clockwise. Do the same for the second filtered. Replace the grease filter.
REMARKS :
• Make sure the filter is securely attached; otherwise, it may come loose
and pose a hazard.
- 27 -