Efco AT900 Manuel D'utilisation Et D'entretien page 31

L
L
E
L L
Kit for treatments with powders and granulars
3. Assemble again the cover of the
engine by passing the chain L through
the hole of the spark plug.
4. Unscrew the nut placed on the screw
of the support of the tank (see point
16 at page 9).
5. Insert on this screw the widen ring of
the chain L, then assemble again the
washer and the nut (as shown in the
left picture).
6. Unscrew the nut placed
on
secures the backrest to
the frame.
7. Insert on this screw the
widen ring of the chain
L, then assemble again
the washer and the nut
(as shown in the left
picture).
D
31
the screw that
M