Efco AT900 Manuel D'utilisation Et D'entretien page 25

C
G
17. Fix the lower part of the plate for the
vibration of the tank Q to the cover of
the fan with the screw you have
removed at the point 15.
A2
C
25
Kit for treatments with powders and granulars
16. As shown in the four
pictures
assemble the reinforcing
plates G and the plate for
the vibration of the tank
Q
Q (this last only on the
side where you removed
the screw at point 15)
fixing
screw T, the flat washers
U and the
V
.
18. Connect the corrugated
tube Ø 20 C, before on
the attachment on the
cover fan and after in the
attachment A2 of the
tank A.
on the left,
them with the
Self-lock nuts