Assembly Of The Grounding Static Electricity Kit While Operating With The Powders - Efco AT900 Manuel D'utilisation Et D'entretien

A
SSEMBLY OF THE GROUNDING STATIC ELECTRICITY
KIT WHILE OPERATING WITH THE POWDERS
While using dust it is necessary to use the chain which earths the mass of
the machine. In particularly dry environments it's possible an electrostatic
overcharge of some parts of the machine, and the worker can feel this
charge. Use the chain in order to avoid this inconvenient.
Warning: don't use pure sulphur during the treatments, it is extremely
flammable. The machine could catch fire. Use only sulphur ventilated with
10% of lime
Warning
While using the mist-blower with powders, it is recommended to wear
shoes with electrostatic dispersion.
Place on a bench your mist blower MB90 / AT900 to which has been
previously assembled the kit for treatment with powder / granular.
1. With the supplied spark plug spanner,
disassemble the cover of the engine
by unscrewing the 4 screws that
secure it.
2. Secure the extreme with the widen
ring of the shorter chain L (120 cm) to
the threaded hole presents in the
cylinder near the spark plug, using the
screw TCEI M5 supplied with the kit.
L
30