Publicité
Les langues disponibles
Les langues disponibles
operating screen. When a Time-outTimer (TOT) activates, an alarm sounds and a countdown message
is displayed for 10 seconds.
◆ Holding a DSC Task
In the Multiple-take mode, you can hold or activate the DSC task, operations as follows.
Example: When a Group call is received,
1. Press softkey [
• The received call's information is displayed.
2. Press softkey [
• The received Group call task is held into the task list and returns to the operating screen.
◆ Activating the Held DSC Task
1. Press softkey [
2. Press [▲]/[▼] to select the task that you want to activate.
3. Press softkey [
• The activated task information is displayed.
4. Press [PTT] to communicate.
5. After finishing the communication, press softkey [
◆ Task List
When one or more tasks are held, you can display the task list screen by pressing softkey [
number of tasks is displayed at the top of the screen.
On the "TASK LIST" screen, the following softkeys are displayed.
Press [
]: Holds the task and returns to the operating screen.
Press [
]: Displays the task information.
Press [
]: Deletes the selected task.
Press [
]: Holds the selected task.
Press [
]: Activates the selected task.
■ Menu Screen Operation
The Menu screen is used to set items, select options, and so on for the transciver's functions.
] to turn OFF the alarm.
].
] to display the task list.
] to activate the task.
MENU SCREEN OPERATION
] to delete the task.
86
], the
Publicité
