Plastimo VHF FX-500 Mode D'emploi page 59

Les langues disponibles

■ Channel Selection

◆ Regular Channel

Press [▲]\[▼] to select regular channel.

◆ Channel 16

Channel 16 is the distress and safety channel. It is used for establishing initial contact with a station and

for emergency communications. Channel 16 is monitored during both Dualwatch and Tri-watch.

1. Press [16/C] to select Channel 16.

2. Press [◄]\[►] to display "

selected channel.

◆ Call Channel

Each regular channel group has a separate leisure-use Call channel (Default Channel 9). The Call

channel is monitored during Tri-watch.

1. Press and hold [16/C] for 1 second to select the Call channel of the selected channel group. "

and Call channel number appear.

2.Press [◄]\[►] to display "

selected channel.

Press [◄]\[►] to select channel.

◆ Weather Channels

The transceiver has 10 weather channels.

The transceiver can automatically detect a weather alert tone on the selected weather channel while

receiving on a regular channel or while scanning.

Selecting a Weather Channel

1. Press softkey[

] to select between weather channel and regualr channel.

·"WX" appears when a weather channel is selected.

·When the WX-Alert is set to ON, "

2. Press [▲]\[▼] to select a Weather channel.

Setting the Weather Alert

1. Press [MENU] key, the menu interface is displayed.

2. Press [▲]\[▼] or rotate [DIAL] knob to select "Radio Settings", then press [OK], the "RADIO SETTINGS"

screen is displayed.

3. Press [▲]\[▼] or rotate [DIAL] knob to select "WX Alert", then press [OK], the "WX ALERT" screen is

displayed.

4. Select "On With Scan" or "On", "WX " is displayed on screen.

", then press the softkey below [

" is displayed insteadof "WX".

], to return to the previously