Publicité
Les langues disponibles
Les langues disponibles
8. Press softkey [
•"Transmitting Group Call" is displayed, and then the assigned channel is automatically selected.
NOTE: If Channel 70 is busy, the transceiver stands by until the channel becomes clear.
9. Hold down [PTT] to communicate.
◆Receiving a Group Call
When a Group call is received:
•
The alarm sounds for 2 minutes.
•
"RCVD GROUP CALL" is displayed.
1.
Press softkey [
•
The channel that is assigned by the caller is automatically selected after 10 seconds by default.
2.
Press the softkey for the next operation.
Press [
]: Ingores the call and returns to the operating screen.
" blinks continuously until you display the call message.
•"
•The call is saved in the DSC Log.
Press [
]: Pauses the countdown until the assigned channel is automatically selected.
NOTE:
is not displayed if the "CH Auto SW" item is set to "Manual".
] to resume the countdown.
•Select[
•The call is saved in the DSC Log.
Press [
]: Accepts the call.
•The assigned channel is automatically selected.
•The call is saved in the DSC Log.
Press [
]: Closes the Group call, then returns to the operating screen.
Press [
]: The receiver call's information is displayed.
] to send the Group call.
] to turn OFF the alarm.
77
Publicité
