Publicité
Les langues disponibles
Les langues disponibles
·"RCVD DISTRESS" is displayed, screen backlight blinks.
1. Press softkey [
2. Press the softkey below the intended operation.
Ingore [
]
·Ingore the call and return to the operating screen.
·The call is saved in the DSC Log.
" blinks continuously until you display the call message.
·"
Pause [
]
[
] is not displayed if the "CH Auto SW" item is set to "Manual".
·Pause the countdown until the assigned channel is automatically selected.
·Select softkey [
·The call is saved in the DSC Log.
Accept [
]
·Accept the call.
·Channel 16 is automatically selected.
·Monitor Channel 16 as a coast station may require assistance.
·After Channel 16 is selected, you can select your next operation by pressing the softkey below the
following options.
Return [
]
·Returns to the operating screen.
History [
]
·Displays the "DISTRESS HISTORY" screen.
Information [
]
·Displays the information of the received Distress call.
■ Individual Call
An Individual call enables you to send a DSC signal to only a specific station.
◆ Sending an Individual Call
1. Press softkey [
NOTE: You can also display the "OTHER DSC" screen by selecting the "DSC Call" item on the Menu
screen.
2. Select "Type", then press [OK].
3. Select "Individual", then press [OK] or softkey [
• Returns to the "OTHER DSC" screen.
4. Select "Address", then press [OK] or softkey [
5. Select the station to send an Individual call to, then press [OK] or softkey [
·Returns to the "OTHER DSC" screen.
NOTE: You can also select "Manual Input" to manually enter the target station.
] to turn OFF the alarm and screen backlight blinks.
] to resume the countdown.
], the "OTHER DSC" screen is displayed.
].
].
73
].
Publicité
