Hilti WSR 36-A Mode D'emploi page 23

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes that still contain liquids.
▶ Do not saw into unknown materials.
3.4 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge state of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights.
1 LED blinks.
*214009*
1
214009
Chuck (blade holder)
@
Hand guard with chuck (blade holder) cover
;
Stroke rate regulator
=
Control switch
%
Safety lock
&
Rating plate
(
Grip
)
Battery release button
+
Battery state of charge display
§
Battery
/
Air vents
:
Forward gripping area (hand guard)
∙
Contact shoe adjustment button
$
Contact shoe
£
Saw blade
|
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
English 17